- OLM – overhead cutter driving system, i.e. all driving elements for the cutter drive as well as for the knife stroke are arranged above the cutting area. Also the control box is above the cutting area. By this construction the machine meets the state-of-the-art hygiene requirements, because unproblematic and effective cleaning is possible.
- The cutting machine disposes of two round plates, on which the products are put for the cutting process.
- The round plates are rotated automatically according to the adjusted number of pieces between the cutting cycles.
- The change of the number of pieces (2 – 24 pieces) is exclusively executed by the machine control, according to this no mechanical re-engineering work is necessary.
- The diameter of the products may be up to 290mm.
- In case of the OLM version a closed protective hood is waived. Security is provided by using a light curtain system. At this it is possible to take out the products without opening the protective covers and to put on new products.
- The machine is manufactured exclusively from food-grade materials.
- The TKSM-R 620 is also deliverable as TKSM-R 420 OLM. In this case the machine is equipped with only one rotary disc (max. Ø 320mm).
- The desired number of the pieces is fed into the machine control.
- The product cut is effected automatically according to the input.
- Microprocessor control with 60 programme memory positions for up to 60 different products
- User-friendly menu navigation
- Individual storage of the set-up programmes with product names
- Substantial possibility of adjusting the parameters of the cutting process (cutting rate, temperature of cutter (up to 100°C), number of pieces and others)
| Length | 1160mm |
| Width | 1320mm |
| Height | 1940mm |
| Weight | 290 kg |
| max. Product size (diameter) | 2 x 290mm |
| max. Product height | 180mm |
| Electr. Power | 230/400V 50 Hz 3 Ph |
