- The cutting machine disposes of two round plates, on which the products are put for the cutting process.
- The round plates are automatically turned between the cutting cycles according to the adjusted number of pieces
- For using it as linear cutting machine the linear table placed on the rear of the machine is inserted into the machine. Backfitting the machine to the respective variant is done by the operator within 2 minutes without technical accessories.
- At linear cutting the products are transported and cut on a cutting plate.
- The machine control recognizes automatically the corresponding variant (round or linear).
- The change of the number of pieces (round) as well as the size of the piece (angular) is exclusively effected by the machine control, according to this no mechanical re-engineering work is necessary.
- The diameter of the round products can be up to 290mm.
- The maximal size of the raw product amounts to 600 x 600mm.
- The machine is manufactured exclusively from food-grade materials.
- The TKSM-R+L 620 is also deliverable as TKSM-R+L 420. In this case the machine is equipped with only one rotary disc (max. Ø 320mm) and the working width at linear cutting amounts to 400mm.
- The desired number of pieces (round products) and the desired number and size of the pieces (angular products) is fed into the machine control.
- The product cut is effected automatically according to the input.
- Microprocessor control with 60 programme memory positions for up to 60 different products
- User-friendly menu navigation
- Individual storage of the set-up programmes with product names
- Substantial possibility of adjusting the parameters of the cutting process (cutting rate, temperature of cutter (up to 100°C), number of pieces and others)
| Length | 1500mm |
| Width | 1390mm |
| Height | 1680mm |
| Weight | 285 kg |
| max. Product size (Diameter / Sheet size) | 2 x 290mm / 600 x 600mm |
| max. Product height | 180mm |
| Electr. Power | 230/400V 50 Hz 3 Ph |
